AMGO 10,000 lb Flush Mount Scissor Lift | XL-10F

Buying the wrong lift can bottleneck your whole bay. Floor posts get in the way, you can’t roll jacks or carts through, and low-rise platforms make under-car work a pain. Safety is another worry if the lift doesn’t stay level or the locks aren’t automatic. The XL-10F solves these pain points with a true flush-mount, full-rise design that leaves your floor completely clear when lowered, plus mechanical safety locks that engage automatically. With a 10,000 lb capacity, about 49 second rise time, and extendable platforms, this vehicle scissor lift feels built for busy commercial shops. Flush-mount scissor lifts give you generous service height (about 75 inches) without the 12-foot ceiling 2-post overhead lifts need, and they sit flush with the floor when lowered so the bay stays usable for other work.

Here’s what that means in day-to-day use. When the XL-10F is down, the bay is a flat, open floor, so vehicles, tool carts, and creepers move freely. Raise to a max lifting height of 75 in for comfortable seated and stooped access around brakes, tires, and suspension. Dual synchronous hydraulic cylinders keep both platforms level, while a photocell trips if they drift out of sync. The electro-air cabinet gives you simple UP, LOCK, and DOWN controls, plus a lower-past-safety confirmation for controlled descents. Power is a 2.0 HP, 220V single-phase motor that’s easy to integrate in most shops. 10,000 lb capacity at full-rise scissor configuration covers full-size sedans, SUVs, and most light trucks. The flush-mount install means the lift disappears into the floor when not in use.

Fit is flexible. The runway length adjusts from 65 1/8 to 80 5/16 in to cover a wide range of wheelbases, and the 31 1/2 in spacing suits most passenger cars and light trucks. Minimum stack height is just 13 3/4 in at the platforms, and a flush install provides level floor entry. Standard 3 in rubber pads help you hit pinch welds cleanly, and an optional SX003 leveling bar kit adds reach for tricky frames. The steel structure is stout, the shipping weight is about 1,964 lbs, and the warranty backs it up for the long haul. For shops with limited ceiling clearance that still need heavy-capacity vehicle service, the XL-10F delivers 10,000 lb full-rise scissor lifting without the overhead-crossmember installation.

Need a different lift style? Compare all vehicle scissor lifts, browse the full Car Lifts collection, or see everything from AMGO. Questions? Call (470) 208-2754.