Heavy-Duty, Clear-Floor Power: AMGO OH-15 15,000 lb 2-Post Lift
If you’re shopping for a serious 2 Post Lift, you’re probably juggling a few pain points right now: not enough capacity for HD pickups, clutter on the floor that slows you down, and uncertainty about ceiling height and concrete requirements. The AMGO OH-15 solves those headaches with a true heavy-duty 15,000 lb rating, a clear-floor design that keeps the bay open, and three column height settings to fit more shops. Direct-drive hydraulic cylinders deliver smooth lifting without the extra wear parts that chain-drive systems add. Automatic arm restraints lock in as you rise, and a single-point safety release keeps daily operation simple. Key numbers you’ll care about right away include a ~84 second lift time, 109-3/4 in drive-thru clearance, and a minimum pad height of 6-7/8 in. 15K is the inflection point where most lifts cross from consumer-grade construction into true commercial structural rating. The OH-15 sits firmly in the commercial tier with 5″ / 3,500 PSI concrete requirements and reinforced structural design.
Versatility is the OH-15’s sweet spot. It’s built to handle 3/4 and 1-ton trucks, vans, and many utility bodies while still being easy to position thanks to super-asymmetric capable two-stage arms. You get 123-1/2 in between the columns for easier door swing and access, plus an overall width of 150-3/4 in that plays nicely with standard bays. The max lift height with adapters reaches 83-7/8 to 85-1/4 in for more under-vehicle working room. If you’ve been searching for a 2 post car lift that isn’t maxed out by HD work, this is it. The OH-15 gives you big-truck ability without giving up everyday efficiency. Three column-height settings (174″, 186″, 198″) cover commercial bay ceiling heights from standard to high-bay. The 2.0 HP 220V power unit cycles consistently at full 15K capacity, with reinforced columns and aircraft-grade equalization cables.
Ownership details matter, too. AMGO includes the stuff others upcharge for: stackable 3 in and 6 in pad extensions, heavy-duty saddle adapters, rubber pads, toe guards, and tool trays. The overhead shut-off bar protects tall roofs and antennas, and the carriages ride on self-lubricating bronze bushings with UHMW sliders for long life. Installation is straightforward if your site is ready: at least 180 in (15’0″) of ceiling height, 5 in of 3,500 PSI reinforced concrete, and a dedicated 220V single-phase circuit. Among AMGO 2 post lifts, the OH-15 is the Heavy-Duty vehicle lift that balances capacity, uptime, and shop flow without nickel-and-diming you on essentials. Keep anchors torqued and change AW-46 hydraulic oil annually and you’re set. For commercial shops handling fleet trucks, work vans, RVs, and other 15K-capable commercial vehicles, the OH-15 delivers genuine commercial-grade structural rating in a price band that doesn’t require fleet contract economics to justify.
Need a different capacity or configuration? Compare all 2 post car lifts, browse the full Car Lifts collection, or read our 2-Post vs 4-Post guide to pick the right style. Questions? Call (470) 208-2754.
Benefits of the AMGO OH-15 Two Post Lift
Key Features of the AMGO OH-15 2-Post Lift You’ll Love:
• 15,000 lb Heavy-Duty Capacity: This lift is purpose-built for HD pickups, vans, and service trucks that outgrow light-duty gear. A true 15K rating gives you headroom for toolboxes, racks, and upfit gear without stressing components. That means fewer capacity compromises and more confident, profitable jobs.
• Direct-Drive Hydraulic Cylinders: Direct-drive removes chains and extra pulleys, cutting down on wear parts and service calls. You get smoother starts and stops, consistent lift speed, and predictable control as the locks engage. Less complexity in the power path means more uptime over the lift’s life.
• Built for Durability and Low Maintenance: Carriages ride on bronze bushings and UHMW sliders that self-lubricate for long service life. Long, stout carriages resist twist under heavy asymmetric loads, protecting your investment. Fewer adjustments and less wear keep your maintenance calendar light.
• Safety-First Controls and Protection: Automatic arm restraints lock as you lift to keep the geometry secure under load. A single-point manual safety release makes lowering intuitive, and a dual-safety design adds redundancy. The overhead shut-off bar protects roofs and antennas from surprises on the way up.
Minimum Garage Requirements
✔ Ceiling Height: At least 180″ (15’0″) recommended ✔ Footprint: 109″ drive-thru x 150″ overall (9’1″ x 12’6″) ✔ Concrete Thickness: Minimum 5″ (127.0 mm) ✔ Concrete Strength: Minimum 3,500 PSI compressive ✔ Electrical: 2.0 HP, 220V, 60 Hz, single-phase ✔ Overall Lift Height: 174″ (14’6″) (measure before ordering)
✔ Ceiling Height: At least 180″ (15’0″) recommended
✔ Footprint: 109″ drive-thru x 150″ overall (9’1″ x 12’6″)
✔ Concrete Thickness: Minimum 5″ (127.0 mm)
✔ Concrete Strength: Minimum 3,500 PSI compressive
✔ Electrical: 2.0 HP, 220V, 60 Hz, single-phase
✔ Overall Lift Height: 174″ (14’6″) (measure before ordering)
*Concrete must meet the manufacturer’s minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer’s responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: 2-post overhead lifts inherently require tall ceilings. Verify your overhead clearance before ordering.
AMGO OH-15 15,000 lb 2-Post Car Lift Specifications |
|
| Manufacturer | AMGO |
| Model | OH-15 |
| Lift Type | Clear-floor 2-post, super-asymmetric capable |
| Capacity | 15,000 lbs |
| Lift Time | ~84 s |
| Max Lift Height – Pads | 74-7/8 in to 76-1/4 in |
| Max Lift Height – With Adapters | 83-7/8 in to 85-1/4 in |
| Max Lock Height – Pads | 72-15/16 in to 74-1/4 in |
| Max Lock Height – With Adapters | 81-15/16 in to 83-1/4 in |
| Overall Height – 3 Settings | 174 in / 186 in / 198 in |
| Overall Width | 150-3/4 in |
| Drive-Thru Clearance | 109-3/4 in |
| Width Between Columns | 123-1/2 in |
| Minimum Pad Height | 6-7/8 in |
| Power Unit | 2.0 HP, 220V, 60 Hz, single-phase |
| Hydraulic System | Dual direct-drive cylinders |
| Safety System | Single-point manual lock release, dual-safety design |
| Overhead Device | Limit switch shut-off bar |
| Arms | Four heavy-duty two-stage arms, super-asymmetric capable |
| Arm Restraints | Automatic |
| Included Adapters | 3 in and 6 in stackable pad extensions, heavy-duty saddle adapters, rubber pads |
| Included Accessories | Toe guards, tool trays |
| Carriage Guidance | Bronze-bushed, self-lubricating with UHMW sliders |
| Equalizer/Sync Cables | Included |
| Gross Weight | 2,423 lbs |
| Recommended Ceiling Height | 180 in (15’0″) minimum recommended, or use the 186 in / 198 in column settings if available |
| Concrete Requirement | 5 in, 3,500 PSI, reinforced, level surface |
| Warranty | Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 Years Hydraulic Parts (cylinders, seals, hoses, fittings): 3 Years Other Parts (excl. Consumables), electrical, power units: 2 Years |
AMGO OH-15 Frequently Asked Questions
What vehicles is the OH-15 built for?
Fleet-duty trucks: a 15,000 lb 2 post lift for 1-ton duallys, ambulances, box vans, and loaded service bodies. The 109-3/4″ drive-thru and 123-1/2″ between columns take wide commercial vehicles, with adapters pushing pad height to 85-1/4″.
How much ceiling height do I need?
The columns install at 174″, 186″, or 198″ — plan on 180″ (15’0″) minimum. The triple setting lets you match the crossbeam to your tallest vehicles.
Which AMGO heavy 2-post is right for me?
This OH-15 is the 15K workhorse. Mostly 1-ton and lighter? The OH-12S fits lower bays for less. Medium-duty box trucks? The OH-18 tops the line at 18,000 lbs on the same footprint.
What does it need for power and air?
A 2.0 HP, 220V, 60Hz single-phase power unit on a dedicated 20A circuit, with an ~84-second rise at this capacity. AMGO lists the 21501 base extension kit as the matching accessory.
Do I need to bolt it to the floor?
Yes — and at 15,000 lbs the spec is concrete at least 5″ thick at 3,500 PSI compressive strength. Have your slab verified before ordering; heavy lifts deserve an engineering check.
Should I get a 2-post or a 4-post lift?
Two-posts like this one are built for repair work — wheels hang free for brakes, suspension, and tires. For heavy trucks that mostly need wheels-supported underbody access, a 4-post can be the better call. Our 2-Post vs 4-Post guide walks through the decision.
Is the AMGO OH-15 worth it?
Fifteen thousand pounds on single-phase power with 5-year structure / 3-year hydraulics / 2-year electrical coverage — fleet capability at independent-shop pricing. See the Reviews tab above for buyer feedback.
Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.
European Price and Ordering Information
Price in EUR: €5452.27. This price has been converted from the original USD price at the ECB euro foreign exchange reference rate 2026-10-26: 1 EUR = 1.1188 USD (USD to EUR rate 0.8938). Product specifications, capacities and dimensions above are reproduced exactly as supplied by the manufacturer; where US imperial units (lb, inches) are shown, please verify measurements before ordering.
Brand: AMGO | Product type: 2-Post Lift | Model / SKU: OH-15 | Source product page: https://pitmasterauto.com/products/amgo-heavy-duty-15-000-lb-2-post-lift-oh-15
Sarah Mitchell –
Very satisfied with this purchase. Good value for money and solid build quality.
Kevin Hall –
Excellent product! Arrived on time and exactly as described. Very happy with the purchase.
Ryan Lee –
Really pleased with this. Solid construction and performs as expected. Would buy again.
Ryan Lee –
Very good product. Delivery was prompt and packaging was secure. Happy customer.
David Johnson –
Good quality product. Arrived on time and as described. No complaints.